XF+ 0.6: dvLED panel at 0.625 mm pixel pitch
XF+ 0.6 is the fixed installation series: a flat cabinet built to sit in a wall, for studios, boardrooms, control rooms and lobbies. One product option in COB, cabinet 600 × 337.5 mm, 1,000 nits. Every option is driven by the ERMAC control system and calibrated as one system in Kassel, Germany.
Surface technology COB, Chip on board: The bare LED dies are mounted straight onto the board and sealed under a single smooth resin surface. Best for: The finest pitches, any room where contrast decides the shot, and floors when a load bearing cover sits over the modules.
Rule of thumb for the viewing distance: the minimal distance in meters equals the pixel pitch in millimeters, so XF+ 0.6 looks sharp from about 0.625 m. One cabinet carries 960 × 540 pixels, is 28 mm deep and weighs 4.7 kg. Processing runs at 26 bit, frame rates up to 60 Hz, refresh rate 7680 Hz.
All option carries a protective coating over the LEDs. Every product option has a technical spec sheet as PDF. Pricing is per project: pick the option in the display designer and our engineers come back with layout, control system and quote.
Specifications per product option
XF+ 0.6 questions
From what viewing distance does XF+ 0.6 look sharp?
From about 0.625 meters. Rule of thumb: the minimal viewing distance in meters equals the pixel pitch in millimeters, which is 0.625 mm for XF+ 0.6. Where people step close and the pixels have to disappear completely, plan about three times that distance.
Which XF+ 0.6 product option fits my project?
XF+ 0.6 comes as one product option, ID 397. It is best for the finest pitches, any room where contrast decides the shot, and floors when a load bearing cover sits over the modules..
Which control system drives XF+ 0.6?
ERMAC, TRUE Performance's own control system, developed and built in Germany. Panel logic and control system are calibrated as one system, which is why the color holds across the whole dvLED wall. On request we also deliver XF+ 0.6 with solutions built on NovaStar or Colorlight.
Other COB families
XF+ 0.7
4 product options · 0.781 mm · 600 × 337.5 mm
See the familyXF+ 0.8 35"
1 product options · 0.807 mm · 775 × 436 mm
See the familyXF+ 0.9
7 product options · 0.938 mm · 600 × 337.5 mm
See the familyXF+ 1.2
17 product options · 1.25 mm · 600 × 337.5 mm / 480 × 480 mm
See the familyXF+ 1.5
12 product options · 1.563 mm · 600 × 337.5 mm / 300 × 337.5 mm
See the familyXF+ 1.8
9 product options · 1.875 mm · 600 × 337.5 mm / 300 × 337.5 mm
See the familyTell us the room, we will tell you the option
Pitch, brightness, viewing distance and whether a camera is in the room decide the right XF+ 0.6 option. Size the dvLED wall in the designer, or send us the room.