XF+ 1.8: dvLED panel at 1.875 mm pixel pitch

Surface technology COB, Chip on board: The bare LED dies are mounted straight onto the board and sealed under a single smooth resin surface. Best for: The finest pitches, any room where contrast decides the shot, and floors when a load bearing cover sits over the modules. Surface technology MIP & SMD FC, Micro LED in package, and flip chip surface mount: Two routes to fine pitch that keep the advantage of a finished, measurable package. Best for: Colour critical rooms that also need serviceability, and long lived installations where batch to batch consistency matters. Surface technology SMD, Surface mount device: Individual red, green and blue LEDs placed onto the board. The most mature way to build a dvLED wall. Best for: Outdoor and daylight, large formats, curved and flexible builds, and projects where value per square metre leads.

Rule of thumb for the viewing distance: the minimal distance in meters equals the pixel pitch in millimeters, so XF+ 1.8 looks sharp from about 1.875 m. One cabinet carries 320 × 180 pixels, is 28 mm deep and weighs 4.7 kg. Processing runs at 26 bit, frame rates up to 240 Hz, refresh rate 3840 / 7680 Hz.

3 options carry a protective coating over the LEDs, the others are uncoated. Every product option has a technical spec sheet as PDF. Pricing is per project: pick the option in the display designer and our engineers come back with layout, control system and quote.